966507102402 
Installation Accessories
-
WAGNER HT3500 DIGITAL HEAT GUN
This model allows you to heat shrink in low or high fan speeds and has a variable temperature setting to fine tune the amount of heat needed for a specific application. (120 volt)
-
SMOOTH-IT REPLACEMENT 3PK GRAY
Grey: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY
-
SMOOTH-IT W/GREY MAT
It’s recommend to use the SMOOTH-IT on your tools at least once a day. Grey: Fine mat, ideal for removing small or lite scratches of the tool.
-
RED DEVIL SQUEEGEE
Flexible squeegee that is great for tight corners and maneuvering around gaskets.
-
SMOOTH-IT REPLACEMENT 3PK BLACK
Black: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY
-
SMOOTH-IT W/BLACK MAT
It’s recommend to use the SMOOTH-IT on your tools at least once a day. Black: Medium mat that works best and faster on big or deep scratch.
-
JIFFY STEAMER J4000W STEAMBLADE
"The J4000W has a large 1 gallon internal water reservoir and provides 2 hours of continuous steam before refilling. Go from PREHEAT mode to full steam power in just two minutes. Has a flexible 7.5’ hose for easy maneuverability on the job and an angled 9” aluminum steam head that concentrates steam into a targeted area for precise removal. Steam- resistant nitrile gloves included in each unit. (120 volt; alternate voltage available upon request)."
-
DOT MATRIX VINYL 16”X50’
Gives the dot matrix area on cars a smooth finished look. Pressure sensitive adhesive requires no heat shrinking.
-
JIFFY STEAMER J2W REPLACEMENT BOTTLE
Replacement bottle for the J2W Jiffy Steamer (T921).
-
KEVLAR HEAT GLOVES (PAIR)
Heat-resistant gloves great for use during heat shrinking.
-
FURNO 300 DUAL TEMP HEAT GUN
Furno 300 Dual Temp Heat Gun with high, medium, low settings. (120 volt)
-
JIFFY STEAMER J2W FILM REMOVER
Impact resistant, with a 1300 watt heating element and heats up in two minutes with 2 hours of steaming per filling. Great for removing film and adhesive from vehicle rear windows. (120 volt; alternate voltage available upon request).
-
WHITE 5 WAY TRIM GUIDE
Use this tool as a trim guide or wrap in paper towels and use as a bump tool. Each of these offers unique shapes and corners. The T-190 White even features a ruler.
-
BLACK 5 WAY TRIM GUIDE
Use this tool as a trim guide or wrap in paper towels and use as a bump tool.
-
GRAY 5 WAY TRIM GUIDE
Use this tool as a trim guide or wrap in paper towels and use as a bump tool.
-
BLADEater
Designed for professional installers, the BLADEater holds your knife safely and securely, and allows you to easily snap and discard blades into the replaceable well. Once the well is full, simply toss the well, blades and all.
-
Hook Tool
Use this tool to pull back on rubber gaskets to tuck film below the seal.
-
WAGNER HT3500 DIGITAL HEAT GUN
This model allows you to heat shrink in low or high fan speeds and has a variable temperature setting to fine tune the amount of heat needed for a specific application. (120 volt)
-
SOAK SHIELD ROPE-XL
Our XL size SoakShield rope able to extend the dash on larger Cars, Trucks, Vans, and SUVs. 18” longer than Original.
-
SOAK SHIELD ROPE-ORIGINAL
Original Standard size is 5-6' long depending on stretching it out during installation. Great for your average coupe, sedan, compact SUV.
-
MAX FLUX HEAT GUN
The Fusion Max Flux Heat Gun is the first heat gun specifically designed for the window film industry. Offers a style that fits perfectly in the nook of your arm for precision handling. The 26 CFM gives you tha ability to spread the heat exactly where you need it. With an adjustable heat guage from 750 - 1000 degrees (Fahrenheit) this heat gun is a good choice for any job. Includes a full roll of Fusion Afterburn Tape in the box and preinstalled!
-
SMOOTH-IT REPLACEMENT 3PK GRAY
Grey: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY
-
SMOOTH-IT W/GREY MAT
It’s recommend to use the SMOOTH-IT on your tools at least once a day. Grey: Fine mat, ideal for removing small or lite scratches of the tool.
-
SOAK SHIELD ROPE-MINI
The Mini size SoakShield is the same length as the original only 30% thinner. Able to fit better it tight gap spaced. Works great for back windows also.
-
RED DEVIL SQUEEGEE
Flexible squeegee that is great for tight corners and maneuvering around gaskets.
-
SMOOTH-IT REPLACEMENT 3PK BLACK
Black: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY
-
SMOOTH-IT W/BLACK MAT
It’s recommend to use the SMOOTH-IT on your tools at least once a day. Black: Medium mat that works best and faster on big or deep scratch.
-
JIFFY STEAMER J4000W STEAMBLADE
"The J4000W has a large 1 gallon internal water reservoir and provides 2 hours of continuous steam before refilling. Go from PREHEAT mode to full steam power in just two minutes. Has a flexible 7.5’ hose for easy maneuverability on the job and an angled 9” aluminum steam head that concentrates steam into a targeted area for precise removal. Steam- resistant nitrile gloves included in each unit. (120 volt; alternate voltage available upon request)."
-
DOT MATRIX VINYL 16”X50’
Gives the dot matrix area on cars a smooth finished look. Pressure sensitive adhesive requires no heat shrinking.
-
JIFFY STEAMER J2W REPLACEMENT BOTTLE
Replacement bottle for the J2W Jiffy Steamer (T921).
-
KEVLAR HEAT GLOVES (PAIR)
Heat-resistant gloves great for use during heat shrinking.
-
FURNO 300 DUAL TEMP HEAT GUN
Furno 300 Dual Temp Heat Gun with high, medium, low settings. (120 volt)
-
JIFFY STEAMER J2W FILM REMOVER
Impact resistant, with a 1300 watt heating element and heats up in two minutes with 2 hours of steaming per filling. Great for removing film and adhesive from vehicle rear windows. (120 volt; alternate voltage available upon request).
-
BLADEater
Designed for professional installers, the BLADEater holds your knife safely and securely, and allows you to easily snap and discard blades into the replaceable well. Once the well is full, simply toss the well, blades and all.
-
T944 AUTOMOTIVE GLASS EDGE TRIMMER
Use along the top edge of roll
down windows for a precise “microedge” finish (1/8”). Use T137 as a
replacement blade.
